Dryfiks® Dryseal Primer
DRYFIKS Dryseal Primer
ADVANTAGES
- Waterborne, non-toxic, non-flammable.
- Versatile & economical product, easy to use.
- Improve flexural strength & hence improve cracking performance.
- Prevent dust generation from plaster & waterproofing surface & improve abrasion resistance.
- Reduce shrinkage cracks.
- Bond strongly with masonry, concrete, plaster stones etc.
- Elevate the capability to resist water impregnation.
Downloadable Resources
Surface preparation is one of the most important steps in every waterproofing or paint system. The best quality paint or coating will fail if the substrate is weak, dusty or suffers from moisture and efflorescence. Subpar priming often instead of poor finishing materials causes paint failures such as peeling paint, chalked surfaces and damp patches that keep reappearing.
As construction is now, so too should a primer be more than just the surface. It needs to support the subtracts, control moisture movement, resist alkalinity and enhance performance of future coatings.
DRYFIKS DRYSEAL PRIMER is a high-performance penetrating primer based on acrylic emulsion for use on inside and outside walls. It penetrates plastered and concrete surfaces, creating a stable and weather-resistant base for paints and waterproofing systems designed to improve adhesion and life.
It is also used as a surface stabiliser and anti-efflorescence primer, re-assuring that wall coatings remain on the wall regardless of colour or extremely adverse environmental conditions.
What is DRYFIKS DRYSEAL PRIMER?
DRYFIKS DRYSEAL PRIMER is a water based acrylic primer developed with:
- Fine fillers
- High-quality white pigments
- Performance additives
- Acrylic polymer emulsion
All these elements form a permeable skin that adheres well to masonry substrates controlling moisture and salts migration.
In contrast to traditional primers, which only adhere superficially, DRYSEAL PRIMER embeds into pores of plaster and concrete providing internal strengthening for long-lasting coating performance.
This is perfect as a base before application:
- Exterior wall coatings
- Interior emulsions
- Waterproof coatings
- Water-based decorative paints
Importance of Priming Before Painting or Waterproofing
Moisture is simply absorbed by the walls from the ambient. The cementitious surfaces will leach alkaline salts over time as well, forming the white powdery deposits on walls that we normally associate with efflorescence.
The following issues occur without priming:
- Paint peeling and blistering
- Uneven paint finish
- High paint consumption
- Surface dusting and chalking
- Dampness penetration
- Reduced coating life
These problems are eliminated by DRYFIKS DRYSEAL PRIMER, which stabilises the surface and acts as an even level in between substrate and coating elements.
Benefits
Waterborne & Eco-Friendly
This means that the product is water-based, non-toxic, and non-flammable which makes it safe for those applying the products as well as individuals occupying these spaces.
Excellent Surface Penetration
Healthily hardens chalking, weak or powdery plaster surfaces to a high standard and increases the durability of coatings.
Improved Adhesion
It makes a firm grip between masonry surfaces and finishing paint or waterproof coating.
Anti-Efflorescence Protection
Prevent swelling and crystallization of salts that cause stains and coating failure on cement surfaces
Reduced Surface Dusting
Reduces dust on plastered & waterproof surfaces and enhances abrasion resistance.
Reduced Shrinkage Cracks
Increase substrate flexural toughness, avoids fine cracking pattern due to minor shrinkage.
Enhanced Water Resistance
It reduces the absorption of water and moisture.
Strong Substrate Bonding
Adheres effectively to:
Masonry
Concrete
Plaster
Stone surfaces
Economical & Easy to Use
Using a simple dilution and application method, labour effort and material waste reduced.
Product Features
Acrylic emulsion technology
Penetrating primer action
Anti-efflorescence performance
Compatible with alkaline substrates
Interior & Exterior walls compatible
Improves paint life and finish quality
Improves waterproofing system performance
Applications
DRYFIKS DRYSEAL PRIMER is used across residential, commercial and industrial construction projects.
Recommended Application Areas
✔ Interior plastered walls
✔ Exterior building facades
✔ Concrete surfaces
✔ Renovation projects
✔ Waterproofing preparation layers
✔ Newly plastered surfaces
✔ Dampness-prone walls
✔ Painted surfaces before repainting
Compatible Substrates
Plastered walls
Concrete surfaces
China mosaic tiles
Asbestos surfaces
Cementitious substrates
It can even tackle alkaline surfaces which normal primers struggle with and is considered very effective at doing so.
How DRYSEAL PRIMER Enhances Waterproofing Systems?
Waterproofing coatings lay down best above a sound and prepared surface. DRYSEAL PRIMER improves waterproofing performance by:
Sealing surface pores
Reducing substrate absorption
Increasing adhesion strength
Preventing moisture migration
Improving coating uniformity
This will keep the waterproof coatings intact for a longer time without peeling or delamination.
Application Areas For Waterproofing In Construction
New Construction
The first step of any project is to use DRYFIKS DRYSEAL PRIMER as an anchoring layer for the new paint. It enhances the bond to the substrate by creating a secure barrier to the substrate, guaranteeing that all subsequent waterproofing and finishes will stay well bonded throughout their lifetime. DRYFIKS DRYSEAL PRIMER prevents many forms of early failure during the first weeks of a building's life cycle, such as peeling and chalking.
Exterior Walls
DRYFIKS DRYSEAL PRIMER provides a high-performance, weather-resistant coating for the exterior walls of a structure. In addition to providing weather protection to the building exterior, it provides significant protection against bonding with alkaline materials in the environment. The acrylic emulsion used to create DRYFIKS DRYSEAL PRIMER permits the formation of a very porous, highly penetrating skin on the masonry substrate, creating a surface finish that will not become destabilized by weather.
Damp Areas
This unique primer has been specifically formulated for use in areas that are subject to water and salt migration through the substrate. It provides exceptional water migration resistance and anti-efflorescence characteristics. In addition to providing protection against moisture movement through the substrate, DRYFIKS DRYSEAL PRIMER will also bond the substrate completely, thereby eliminating the possibility of damp patches and efflorescence reappearing after paint is applied, which adversely affects visual aesthetics.
Renovation Projects
In renovation projects, DRYFIKS DRYSEAL PRIMER creates a bond between the paint and the loose and powdery substrate before repainting. DRYFIKS DRYSEAL PRIMER binds the loose particles and "whispery" surfaces of the existing paint and substrate to create a solid base to apply new architectural finishes.
Walls inside of buildings
The penetrating primer for walls inside of buildings will help to combat the cause of coating loss below the ground surface by controlling moisture movement and resisting alkalinity. Because moisture cannot move freely, this allows the paint to remain longer on the wall by preventing the growth and spread of fungi as well as the aesthetic loss of decorative layers due to unsightly deterioration.
Concrete and plastered materials
The primer has fine fillers and high-grade pigments that allow it to sufficiently penetrate into concrete and plastered materials versus simply floating on top. As a result of this, the primer provides a substantial chemical/physical bond enhancement for future waterproofing and painting systems and is therefore a preferred surface preparation material.
Method of Application
Proper application ensures optimal performance.
Step 1: Surface Preparation
Clean surface thoroughly.
The surface needs to be cleaned and free of dust, grease, oil, loose particles and old coatings.
Must not have considerable moisture left over the surface
Step 2: Crack Treatment
For cracks measuring over 5 mm choose appropriate crack repair materials.
Small surface cracks should be patched prior to priming.
Step 3: Dilution
Use water to dilute DRYFIKS DRYSEAL PRIMER in two parts to one part ratio.
Stir well until everything is fully combined.
Step 4: First Coat Application
Apply a single coat by brush, roller or spray.
Allow drying for 2–3 hours.
Step 5: Surface Sanding
A Light Sanding Helps for Effect Smooth Finish.
Step 6: Final Coat
Last coat in places you need to paint/waterproof ← painting w/ Masonry water proofer options like:PRF-1256173935.
Coverage
Approximate coverage:
8–10 m² per litre per coat
(This coverage is based on surface texture and porosity.)
Packaging
Available pack sizes:
1 kg
5 kg
Great for small residential jobs to large control work.
Storage & Shelf Life
Store in cool, dry conditions.
Keep container tightly sealed.
Store in a temperate and dark place away from heat sources
Precautions
Dilution with water is a maximum of 50%.
Do not apply when raining or directly in sunshine.
Ensure to take off excess water from substrate before application
Do not tint the primer.
Be sure that drying is correctly activated before using a covering or paint.
Where DRYSEAL PRIMER Makes All the Difference
New Construction
Gives a consistent foundation that strengthens paint adhesion right from the start.
Renovation Projects
Reestablishes whispers and powdery substrates prior to repainting.
Dampness-Prone Areas
Provides resistance to efflorescence and water.
Exterior Walls
Prevents exposure to environment and alkaline indices
Why Choose DRYFIKS DRYSEAL PRIMER?
Coating failure, as practitioners in the field know too well, often starts below grade. DRYFIKS DRYSEAL PRIMER cures paint & waterproofing failure by fortifying the substrate that houses it.
Choosing DRYSEAL PRIMER means:
- Longer-lasting paint systems
- Better waterproofing performance
- Reduced maintenance costs
- Improved wall aesthetics
- Reliable adhesion on difficult surfaces
It is more than a primer — it is a substrate layer for long-lasting architectural finishes.
Surface preparation is the key to a hard wearing and durable finish. Combining high penetration, anti-efflorescence and adhesion enhancement, DRYFIKS DRYSEAL PRIMER offers state-of-the-art priming performance.
Regardless of whether it is applied on new construction or renovation surfaces, it contributes to coatings enduring better, working longer and looking great over life time.
DRYFIKS DRYSEAL PRIMER is available from International Protective Coatings and is the surface preparation choice of modern construction, renovation and waterproofing systems the choice for reliable surface preparation and long term protection of the wall.
Frequently Asked Questions:
What is DRYFIKS DRYSEAL PRIMER and what is it used for?
It’s a high-performance penetrating primer designed with water-based acrylic for interior or exterior wall surfaces. The purpose of using it would be to stabilize a weak surface, improve adhesion of subsequent paint or waterproofing coats, and to prevent the migration of salts and moisture through the substrate as an anti-efflorescence treatment.
So, can I paint (i.e. skip the primer) on a newly constructed wall?
Not advisable. New wall surfaces will have high alkaline levels and debris in loose form. The DRYSEAL PRIMER will provide a uniform surface for the paint and will help to hold the paint down to the surface of the wall. Not using a primer in these applications may result in the failure of the paint to stay adhered to the wall and/or the display of damp spots or salt deposits will continue to happen.
How does the primer assist with "dampness" issues?
The primer has blend performance additives that provide a permeable skin on the wall. The permeable skin will control the movement of salts and moisture (efflorescence) from inside the masonry to the surface of the wall. By eliminating the passage of these salts through the penetrable skin, it will prevent the final paint film from separating from the wall because of internal pressure.
Can DRYFIKS DRYSEAL PRIMER be used on old walls being renovated?
Absolutely – it is perfect for renovations. The product provides a surface stabilization for old, weathered and previously painted surfaces, by binding loose particles and producing a stable weather-resistant base which will allow the new architectural finish to last considerably longer than if applied to an untreated surface.
What are the primary technical advantages of using DRYSEAL PRIMER in comparison with regular primer?
The benefit of using DRYSEAL PRIMER is that unlike most ordinary primers, which only sit on the surface, the product will penetrate into the underlying plaster or concrete significantly deeper. DRYSEAL PRIMER provides the following benefit:
High Alkali Resistance: protects against the potential “burning” effect of new concrete.
No Efflorescence: prevents the movement of salts.
Deep Penetration: binds the substrate from within.
Improved Coverage: seals the porosity of the surface (providing the opportunity to save on topcoats).
What types of surfaces can DRYSEAL PRIMER be applied to?
DRYSEAL PRIMER is highly effective on all masonry substrates (i.e. fresh cement plaster, concrete, or previously painted surfaces that need to be re-stabilized) and can be used effectively for both interior and exterior applications.