DRYFIKS Crack-Seal 5
DRYFIKS Crack-Seal 5
ADVANTAGES
Simple to apply using a putty knife, much like traditional putties.
One pack of soft paste that is simple to apply using a putty knife.
Ready to use paste form, without sagging.
Stops any liquid substance from leaking onto the concrete surface, preventing staining.
Long-lasting durability on the applied surface and outstanding adherence to cementitious surfaces.
Over paintable by any type of polymer based, Primer/Paints after 48 hrs of air dry.
Water based paste with very low VOC
It can be colored using water-based stainers.
Downloadable Resources
DRYFIKS™ CRACK-SEAL05 is made up of acrylic emulsion polymer of superior quality, combined with graded fillers and fibers, forms a single-component, flexible putty that is simple to apply for repairing cracks in plastered surfaces. This product offers outstanding adhesion, user-friendly application, water resistance, an attractive finish, and long-lasting durability.
Frequently Asked Questions
What are the available sizes for DRYFIKS CRACK SEAL05?
Packaging size of each product are 1 kg, 5 kg, 50Kg and 20 kg.
How to apply DRYFIKS CRACK SEAL 05?
- Using a spatula or putty knife, press DRYFIKSTM CRACK-SEAL05 firmly into the crack just once. Then, use palti patra to level the surface.
- Avoid formation of cavities or bubbles during application.
- Allow to cure for 24 hours and then apply 2nd coat of DRYFIKSTM CRACK-SEAL05.
- After 48 hours of air curing, which is recommended for optimal results, POP or painter’s putty can be applied.
- Clean tools & equipment and hands with soap and warm water, immediately after use.
What are the Restrictions & Cautions of using DRYFIKS CRACK SEAL 05?
- Not suitable in structural cracks, expansion joints & separation gaps.
- Should be used for cracks less than 5 mm thickness.
- Avoid using it when it’s raining or wet.
- The drying time will be prolonged if the application is below 10°C.
- After application, tightly seal the bottle.